Personal menu

Crown DriveCore Amplifier 2/600w @ 4/8ohm/100v

Manufacturer: Crown

1 review(s) | Add your review

Analog input, 2 channel, 600W per output channel

2-channel 600w audio amplifier suitable for medium-sized installations.
DriveCore Technology enhances audio fidelity and reliability significantly.
Network control via Harman’s HiQnet Audio Architect software for easy management.
On-board DSP allows for custom configuration and advanced sound processing.
Supports 70V or 100V output for high impedance applications effortlessly.

SKU: CDI2600

Availability: In stock

$2,998.99 incl tax

Qty:

i h

Overview
Specs
Reviews
Contact Us

CDi DriveCore 2|600 is a 2-channel 600w audio amplifier.

Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 2|600 offers streamlined functionality to work in almost any medium sized installation such as cinema, houses of worship, bars, lounges, and even for driving the larger underwater speakers from Lubell.

Designed for ease-of-use in a variety of applications, the 2|600 is a 2-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer.

Features

DriveCore Technology – Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.

Network Control and Monitoring – Through Harman’s HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP/IQ network.

DSP – On-board Digital Signal Processor in each amplifier allows for custom configuration

Input Router
Input Delay – Up to 1000ms
Input Parametric EQ – 8 band
Crossover
Output Parametric EQ – 8 band
Output Delay – Up to 100ms
LevelMAX™ Limiter

Direct Drive 70/100Vrms Output – Each output channel is capable of provide either 70V or 100V for high impedance applications.

Front-Panel Interface – Completely configure the amplifier using an intuitive front-panel interface.

GPIO/AUX Port – Recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined GPIO/AUX Port.

Specifications

BLU link	No
Channels	2
Sensitivity (for full rated power at 8 ohms)	0.7V RMS
Rated Power Output (per channel @ 4 ohms)	600W
Analog Input Signal to Noise Ratio (ref. rated power, 100V, 20Hz - 20kHz) at 8 ohms)	> 104dB
THD (full rated power, 20 Hz - 20 kHz)	0.35%
Damping Factor (20 Hz to 100 Hz)	> 1000
Frequency Response (8Ω, 20 Hz - 20 kHz)	+/-0.5dB
Crosstalk (below rated power) 20 Hz to 1 kHz	> 80dB
Input Impedance (nominally balanced, nominally unbalanced)	20 kΩ balanced, 10 kΩ unblanced
Dimensions (inches) (W x H x D) (depth not including 1.3 inch front panel protrusion)	19 x 3.5 x 12.25
Weight	14.56 lbs (6.6 kg)
Power Supply Connector	"Standard IEC type 320 inlet for detachable connector 100 – 240V~"

0 review(s)

Write your own review Close

Your name *

Your email *

Enquiry *